Posts

Downloads

Siemens Rev 19 (SIEMENS)

The Adroit Siemens protocol driver supports various Siemens PLC models and communication protocols.

Supported communication protocols:

  • ISO over TCP/IP – Ethernet connection.
    • supported PLC models: S7-200, S7-300 and S7400
  • MPI – Serial connection.
    • supported PLC models: S7-300 and S7-400
  • MPI via IBH Link S7/S7++ – Ethernet connection from Adroit to IBH Link, serial connection from IBH Link to PLC.
    • supported PLC models: S7-300 and S7-400
  • PPI – Serial connection.
    • supported PLC models: S7-200
  • PPI via IBH Link S7/S7++ – Ethernet connection from Adroit to IBH Link, serial connection from IBH Link to PLC.
    • supported PLC models: S7-200

Lovato RGK60 Serial Rev 16 (LOVRGK)

LovRGK communicates to the bigger RGK device for Backup Generator-set monitoring (both Serial and Ethernet-encapsulated Serial).
IMPORTANT: LovRGK is NOT compatible with the old LOVATO driver.

Mitsubishi Q, QnA, L, R and iQF Series Ethernet (3E Frames) Driver Rev 70 (MITQJE71)

Mitsubishi Q, QnA, L, R and iQF Series Ethernet (3E Frames) Driver was FORMERLY KNOWN AS “Mitsubishi Q and QnA Processor series ethernet driver”, as you can see from the new name this driver also supports the R Series. This driver supports the binary variation of the 3E frames, and supports porting from an A-series configuration.

List of Adroit 8.4.2 and MAPS 3.4.2 SCADA Protocol Drivers

This lists the latest Adroit SCADA drivers and their revisions (updated drivers have a bold revision number); this list also indicates, which of these drivers require their own license before they can be used.

DSC Envisalink Ethernet Rev 8 (DSCENV)

DSC EnvisaLink Ethernet Driver

DNP3 Level 2+ Driver Rev 83 (DNP3) [OEM License Required]

Serial and ethernet driver (modems supported) for the Distributed Network Protocol. Adroit supports communication with the following DNP3 levels : Level 1 and level 2 and some level 3 and 4 functions.

GSM SMS modem Rev 24 (GSM_SMS)

This driver is used by the Command Agent Adroit 6 only to send SMS’s, receive remote commands, and escallate Alarms over a GSM modem. Can also be used to replace the User-Driver SMS function.

Modbus I (RTU and ASCII) Rev 93 (MODBUSI)

This driver supports modbus and clones on binary and ASCII protocols.

Mitsubishi FX Serial Rev 21 (MITFXS)

This is our current FX driver for connection to all Mitsubishi FX controllers (including FX3 range). Direct front-port access (can also use the expansion DB-board port) using the programmer cable.